Dialogic DSI SPCI Network Interface Boards - Manual (Page 80)

6 Message Reference
80
Parameter Description:
Board Status
Value Mnemonic Description
0x60 SSDSI_RESET Processor successfully reset.
0x62 SSDSI_FAILURE Failure to reset board.
0x64 SSDSI_BRD_RMVD Board removed (hot swap only).
0x65 SSDSI_BRD_INS Board inserted (hot swap only).
0x66 SSDSI_LIC_FAIL License validation failure.
0x67 SSDSI_LIC_CRP License corruption.
0x70 SSDSI_BCONG_CLR Message congestion towards board cleared.
0x71 SSDSI_BCONG_ON Message congestion towards board occurred.
0x72 SSDSI_DIS_CLR Message congestion discard towards board cleared.
0x73 SSDSI_DIS_ON Message congestion discard towards board.
0x74 SSDSI_FAIL Message congestion - board failure.
6.4.2 s7_mgt Completion Status Indication
Synopsis:
Message issued by s7_mgt on completion of initial configuration sequence.
Message Format:
MESSAGE HEADER
Field Name Meaning
type API_MSG_CNF_IND (0x0f09)
id 0
src 0xcf
dst Notification Module (see below)
rsp_req 0
hclass 0
status Completion Status (see below)
err_info Reserved for future use
len 0