Dialogic DSI SPCI Network Interface Boards - Manual (Page 52)

6 Message Reference
52
board_rev
The DSI SPCI Board hardware revision number.
swa
The setting of the board's rotary switch labeled "Boot".
Note: The switch should be set to 8.
swb
Geographic addressing switch setting, that is, the address at which the board
appears when the -o3 feature of ssds is used.
prom_maj_rev
Firmware major revision number.
prom_min_rev
Firmware minor revision number.
esn
The board's electronic serial number.
lsn
License serial number. The serial number of the fitted license button.
Status Response
The confirmation message (if requested) indicates success by status of zero.
On error, the following status value can be found in the confirmation
message.
Value Mnemonic Description
0x01 None Invalid message length.