Dialogic DSI SPCI Network Interface Boards - Manual (Page 78)

6 Message Reference
78
Parameter Description:
liun_pri
The relative priority for each LIU using the values taken from the following
table:
Value Meaning
0 No change to the interface’s priority.
1 … 32 New priority value for the line interface. The value 1 indicates highest
priority, 32 the lowest priority. If two interfaces are given the same priority,
the lowest-numbered interface is used first.
255 Special value indicating that the line interface must not be used for clock
recovery.
Status Response
The confirmation message (if requested) indicates success by status of zero.
On error, the following status value can be found in the confirmation
message.
Value Mnemonic Description
0xff None Request to configure clock recovery priority order fails.