Zoom R16 - Manual (Page 89)

R16 eff
ect types and parameter
s
88
Type Parameters/Descriptions
Chorus
LFO Type Depth Rate Pre Delay EFX Level
Mixes a variable pitch-shifted component with the original sound, resulting in full-bodied resonating tone.
Delay
Time Feedback Hi Damp Pan EFX Level Rev Send
Delay effect with a maximum setting of 2000 ms.
Parameter descriptions
Parameter
name
Setting range Description
LFO Type Mono, Stereo Sets LFO phase to mono or stereo.
Depth 0~100 Adjusts effect depth.
Rate 1~50 Adjusts modulation rate.
Pre Delay 1~30 Adjusts pre-delay time.
EFX Level 0~100 Adjusts effect sound level.
Rev Send 0~30 Adjusts delay sound reverb send level.
Time 1~2000ms (P.86 Table 1) Adjusts delay time.
Feedback 0~100 Adjusts feedback amount.
Hi Damp 0~10 Adjusts intensity of delay sound high range damping.
Pan Left10~Left1, Center, Right1~Right10 Adjusts delay sound panning.
CHORUS/DELAY module
R16 effect types and parameters 10
Send/return effect
Parameters/Descriptions
Hall Simulates the acoustics of a concert hall.
Room Simulates the acoustics of a room.
Pre Delay Decay EQ High EQ Low E.R.Mix EFX Level
Hall and Room have the same parameters.
Spring Simulates a spring reverb.
Plate Simulates a plate reverb.
Pre Delay Decay EQ High EQ Low EFX Level
Spring and Plate have the same parameters.
Parameter description
Parameter
name
Setting range Description
Pre Delay 1~100 Adjusts pre-delay time.
Decay 1~30 Adjusts reverb time.
EQ High −12~6 Adjusts high range effect sound.
EQ Low −12~6 Adjusts low range effect sound.
E.R.Mix 0~30 Adjusts mix ratio of initial reflections.
EFX Level 0~100 Adjusts effect sound level.
REVERB module