Zoom R16 - Manual (Page 56)

Inser
t eff
ect> P
atc
h sel >Rec signal
55
WET
(Default value)
The input signal will be recorded
to the track after it passes through
the insert effect.
DRY
The input signal will be recorded
t o t h e t r a c k b e f o re p a s s i n g
through the insert effect. However,
the input signal monitored from the
OUTPUT and PHONES jacks will
pass through the insert effect first.
Effect ON/OFF switch
press [ENTER].
When “INSERT EFFECT Off” is displayed,
Using the insert effect only for monitoring
By applying an insert effect only to monitoring, unaffected input signals can be recorded to tracks.
Select . >REC SIGNAL
4
N o . 0 0 : S t a n d a r d
> R E C S I G N A L
Press [ENTER].
. Select DRY
5
Press [ENTER].
R E C S I G N A L
D r y
Change s etting
HINT
• The settings made here will be stored project by
project.
• If necessary, restore the initial “Wet” setting before
recording other parts.
C L E A N
N o . 1 5 : S t a n d a r d
E
2
Select the Algorithm/Patch.
Change patch
Change
algorithm
Using the insert effect only
for monitoring
By default, when an insert effect is
applied to an input signal, the signal
with the effect is recorded to the track.
However, when desired, you can apply
the insert effect only to the monitoring
outputs and record the non-processed
input signal on the track.
For example, you can apply an insert
effect to a microphone, to make a vocalist
feel more comfortable singing, but still
record the vocal without the effect.
Effect
Press [ ].
3
1
Press [INSERT EFFECT].