Zoom R16 - Manual (Page 53)

Inser
t eff
ect/send return eff
ect>P
atc
h sel>Edit
52
Press [EXIT] to return.
3
Press [EXIT] to finish.
3
Press [EXIT] to finish.
2
NOTE
• You cannot edit an algorithm itself, including
the combination and arrangement of the effect
modules.
• If you turn “off” an effect module, all the settings
after the effect module, such as the type and
parameters will also be turned off.
• When you are using 8 x COMP EQ, you cannot
turn an effect on or off for all channels at once.
But if you press [ENTER] when an effect setting
value is displayed for the desired channel, you
can switch it off for that channel.
• You cannot turn off the “TOTAL” modules.
• There is no ZNR module in the 8 x COMP EQ
algorithm.
• If you change to another patch without saving a
patch that shows the ‘E’ mark, your edits will be
lost completely. Please refer to the next page for
patch saving.
Adjust the effect parameters Change INSERT EFFECT name
Change SEND RETURN EFFECT name
2
Set the value.
E n s e m b l e E
D e p t h = 2
Change
value
1
Select a parameter.
E n s e m b l e E
D e p t h = 2
Change
parameters
1
T O T A L
P a t c h L e v e 1 = 2 5
Select . TOTAL
Change module
Press[ ].
2
Press [ ] until you see
PATCH NAME.
Change
value
P a t c h N a m e
S t a n d a r d
Blinks
Change name
Press[ ].
1
Press [ ] until you see
PATCH NAME.
P a t c h N a m e
S t a n d a r d
Blinks
Change name