Zoom R16 - Manual (Page 74)

73
4
Execute.
C A R D R E A D E R
E n t e r ?
Press [ENTER].
1
Connect the R16 with a computer
by USB (DEVICE JACK).
1
To properly disconnect the R16
from your computer, follow your
operating system's procedure for
removing hardware.
Press [USB].
2
Card reader
Using as an SD card reader
USB>CARD READER
Disconnecting
You can access the R16 SD card through a computer to backup, read and import various data, projects and files.
USB
USB>Car
d reader
Operating the R16 from a computer.
To computer
Back up project data on an SD card to a computer.
From computer
Import to an SD card from a backup of audio and
computer data.
NOTE
• To import an audio file into the R16, its format
must be WAV with a sampling frequency of 44.1
kHz and a bit rate of 16 or 24.
• File names should use only capital letters, numbers
and the "_" (underscore). They should be 8 or fewer
characters plus the “.WAV” extension.
Press to disconnect the R16
as a card reader.
2
or
Ref. : Assign to tracks P.23
Select .
3
U S B
> C A R D R E A D E R
Change
menu
Press [ENTER].
>CARD READER
HINT
• Card reader OS compatibility
Windows: Windows XP and later
Macintosh: Mac OS x 10.2 and later
• Project data is saved to the ROOT DIRECTORY of
the SD card as PROJxxx (xxx is the project number)
and audio data is saved as “WAV” files inside
“AUDIO” in the project directory.
• The MASTER track and stereo tracks are stereo
WAV files.
• To import WAV files from a computer, copy them
to the “AUDIO” folder in the “PROxxx” project
folder (xxx=project number) where you want
to use them. Use the R16 to assign the files to
tracks.
• You can connect the R16 to a computer by USB
when the power is on.
• If you connect the R16 by USB when its [POWER]
switch is OFF, you can start it up with power
supplied over USB.
For details about use with a computer, refer to the detailed
manual (PDF) on the CD-ROM included with the R16.