Zoom R16 - Manual (Page 49)

Inser
t eff
ect/send return eff
ect
48
Insert effects and send return effects are selected and
adjusted the same way.
You can select the most appropriate modules from the
algorithms, edit types and parameters and use saved
patches.
There are a few major differences between the two
types of effects when making settings. For an INSERT
EFFECT, you select a patch and set the insertion
point. For a SEND RETURN EFFECT, you adjust the
send level of the signals using the mixer.
Other functions are “IMPORT” to get patches from
another project and “REC SIGNAL” to apply the effect
only to monitoring.
The use procedures of effects are the same when
using the R16 as an audio interface and control
surface, but the patches are initialized when the unit is
not used as a recorder.
Uses of effects and patches Select effect & patch
1
Press until the red light turns on.
Press [PLAY/
MUTE/REC]. Red light on.
INSERT EFFECT
Algorithm name
on display
Number of patches
(programmed patches)
Algorithm suitable for guitar/bass recording
CLEAN 30(22)
DISTORTION 50(40)
ACO/BASS SIM 20(10)
BASS 30(20)
For microphone recording, such as vocals
MIC 50(30)
For 2 independent channels (2 mono inputs/outputs)
DUAL MIC 50(30)
For recording synthesizers, electric pianos and other line-
output instruments
STEREO 50(40)
Algorithm with 8 independent channels of input/output
8×COMP EQ 20(10)
Processing for final stereo mixes
MASTERING 30(21)
SEND RETURN EFFECT
Algorithm name
on display
Number of patches
(programmed patches)
Process final stereo mix signals
CHORUS/DELAY 30(18)
Process final stereo mix signals
REVERB 30(22)
Effect
3
Select the algorithm.
Algorithm name
Patch number: Patch name
Insert effect example
Insert effect
insertion point
Change
algorithm
C L E A N < I N 1 >
N o . 0 0 : S t a n d a r d E
E (edit mark): items
are already edited
C L E A N , D I S T O R T I O N ,
A C O / B A S S S I M ,
B A S S , M I C ,
D U A L M I C , S T E R E O ,
8 x C O M P E Q ,
M A S T E R I N G
Send return effect example
S E N D C H O R U S / D E L A Y
N o . 0 0 : S h o r t D L Y
C H O R U S / D E L A Y
R E V E R B
Press [ENTER] to turn on/off.
2
or
Press [INSERT EFFECT] or [SEND RETURN EFFECT].
EDIT P.53
IMPORT P.55
INPUT SOURCE P.51
REC SIGNAL P.57
Press [ ].
4
Select the patch.
C L E A N < I N 1 >
N o . 1 5 : S t a n d a r d E
Change patch