Zoom R16 - Manual (Page 23)

Recor
ding the fir
st trac
k
22
NOTE
• Recorded audio files in a track will be recorded
over. If you rewind the counter back to the head,
a new recording will overwrite the previous one.
During playback the files stored on the tracks will
be played.
If you want to record a new file, do not assign a file
to the track.
Ref. : Assigning files to tracks
Mark
P.23
P.31
Playing back the first track
14
Press [STOP].
Stop.
Green light on
13
Press [PLAY].
Play.
Green light on
10
Stop.
Press [STOP].
The counter
stops moving.
P R J 0 0 1 P R J 0 0 1
0 0
0 0 : 0 4 : 3 1 : 1 5 3
Lights off Green light on
HINT
• Press [UNDO/REDO] to cancel the recording.
Recording again
• If you record on the same track again, the
previous recording will be overwritten.
• The three ways to record a new file or re-record
are:
• Press the [UNDO/REDO] key to execute the
undo-action (cancel the recording).
• Through PROJECT>FILE, set the recorded
track assignment to “NOT ASSIGN.” (Ref.: P.23)
• Through PROJECT>FILE>EDIT>DELETE,
delete the FILE (AUDIO DATA). (Ref. : P.62)
Recording the first track
7
Start record standby.
Press [REC].
Red light on
9
Stop recording.
Press [STOP].
The counter stops moving, but does not return to 0.
P R J 0 0 1 P R J 0 0 1
0 0
0 0 : 0 2 : 0 4 : 2 4 7
Lights off Green light on
8
Start recording.
Press [PLAY].
The counter starts to move.
P R J 0 0 1 P R J 0 0 1
0 0
0 0 : 0 0 : 0 0 : 1 2 3
Red light on Green light on
11
Green light on: playback
enabled [PLAY]
Play the track.
Press the [PLAY/MUTE/
REC] key of the TRACK to
playback 1–2 times until
the green light is on.
12
Return the counter to its head.
P R J 0 0 1 P R J 0 0 1
ト 0 0
0 0 : 0 0 : 0 0 : 0 0 0
Press [REW] & [Stop] at
the same time to return the
counter to its head.