Zoom R16 - Manual (Page 52)

Inser
t eff
ect/send return eff
ect>P
atc
h sel>Edit
51
: Patch editing
You can create patches that combine effects together, change effect types in patches, or change
processing however you like by adjusting the depth of effects using their parameters.
HINT
• Some patches say “Empty,” because no modules
in the patch have been set yet.
• When you want to edit the ZNR module, go to the
page with “TOTAL” in the first row.
• You can individually edit the modules arranged in
the L/R Channels of the DUAL MIC ALGORITHM.
Your selection is the left channel when the first
row displays “L” and the right channel when the
first row displays “R.”
• In the 8 x COMP EQ ALGORITHM, each channel
has its own HPF, COMPRESSOR and EQ
modules and you can turn each effect module on/
off on each channel independently. You can check
the current channel by looking at the number in
the first row of the display.
Set the effect module
Edit effect modules
5
Turn the effect types on/off.
Effect module off
C o m p r e s s o r
O f f
Type (effect module) ON
C O M P / L I M I T E R E
C o m p r e s s o r
E: Edit mark
Effect type Shown after you edit or change
Press [ENTER] to switch.
Effect
Effect on/off switch.
If “INSERT EFFECT Off” is
displayed, press [ENTER].
1
Edit the patch level
(final patch sound volume)
7
Set the patch level.
Change
value
T O T A L
P a t c h L e v e l = 2 5
Change module
6
Select the effect module.
Effect type
C O M P / L I M I T E R E
C o m p r e s s o r
M O D / D E L A Y E
C h o r u s
Change module
8
Press [EXIT] to return.
Select .
4
N o . 1 5 : S t a n d a r d
> E D I T
E
Change
item
Press [ENTER].
>EDIT
Insert effect
Send return effect
or
Press [INSERT
EFFECT] or
[SEND RETURN
EFFECT].
C L E A N < I N 1 >
N o . 1 5 : S t a n d a r d E
2
Select the algorithm/patch.
Change
patch
Change
algorithm
3
Press [ ].