Zoom R16 - Manual (Page 17)

Displa
y inf
ormation
16
Display information
On the R16’s display you can see project data, recorder connection and operation status, computer
audio-interface connection and status, available functions and the R16 menus.
The TOP screen shows the current projects.
Top line: project number and project name
Bottom line: icon mark/number and counter (time)
Not shown means inactive
Shown means active
Information
display area
Usable directions
Icon display area: active settings shown
MENU screens show operation menus
P R O J E C T 1 / 7
> S E L E C T
Top line: current menu
Bottom line: menu &
items available
Page in menu/total
number of pages
Display and indications
Icon display and setting keys
Display on: 48V phantom power is supplied to mics connected to INPUT 5 & 6
Setting: [PHANTOM] switch ON
PHANTOM icon
Display on: Batteries in use and their remaining charge
No display: AC adapter or USB power in use (no display while
powering with batteries means the batteries need to be replaced)
BATTERY icon → P.13
Display on: project cannot be overwritten
No display: project not protected
Set using menu
PROTECT icon → P.56
Effect & Mode
Key operation: Open effect menus
Send return effects → P.48
REVERB/CHORUS icons Shown when on, set
by key operation
Shown when insert effects on, set by key operation
INSERT EFX icon P.48
MODE
Displays current R16 operation mode
Recorder → P.17-
Audio Interface → P.75-
Card reader → P.73
[UNDO/REDO]
UNDO icon REDO icon [UNDO / REDO] key
Icon shown/not shown
After certain operations, “UNDO” is displayed, meaning an
UNDO operation is possible
After pressing the [UNDO/REDO] key, “REDO” is displayed,
meaning a REDO operation is possible.
Set by key operation.
NOTE
• UNDO is only valid for audio data recorded on tracks.
• You can only UNDO and REDO one operation.
A-B REPEAT icon
→
P.30
[A-B REPEAT] key
Display on: A-B points are set
Set by key operation
AUTO PUNCH IN/OUT icon
→
P.27
[AUTO PUNCH IN/OUT] key
Display on: active
Set by key operation
BOUNCE icon
→
P.37
Display on: active
UNDO: You can return to the previous recording operation
Valid UNDO operations: PUNCH IN/OUT, BOUNCE, MIX
DOWN (to MASTER TRACK)
REDO: Reverse the UNDO operation
key
INSERT
EFFECT
key
SEND
RETURN
EFFECT