Zoom R16 - Manual (Page 15)

P
o
wering the R16 · Date & time setting
14
Select items under >DATE/TIME .
Turning the power on and off
1) Make sure the power is off on all
equipment.
2) Insert an SD card into the R16. Confirm that
the connections for the power, instruments,
a nd m oni t oring s y s t em ( or s t ere o
headphones) are correct.
Selected figure blinks
Turn the [POWER]
switch OFF.
Turn power on for connected instruments
and then for the monitoring system.
Turn the [POWER]
switch ON.
NOTE
• Before turning the [POWER] switch ON, turn
the volume down on all instruments and the
monitoring system connected to the R16.
• If no power is supplied to the R16 for more than 1
minute, the DATE/TIME setting will be reset to its
initial value.
If this is displayed:
• The DATE/TIME setting has been set to its initial
value. Reset the DATE/TIME settings.
Move with
the cursor
keys
Select >SYSTEM
Select >DATE/TIME .
.
.
Turn [POWER] switch ON: Start-up
Powering the R16 · Date & time setting
Precautions for starting-up and shutting down and how to set the date and time for files and data
1
Press [TOOL].
T O O L
> T U N E R
T O O L
> S Y S T E M
S Y S T E M
> L C D
2
Press [ENTER].
S Y S T E M
> D A T E / T I M E
3
Press [ENTER].
Setting the date and time
4
DATE TIME
2009/01/01 00:00:00
Make setting for the year, month, day and
time (hour: minute: second).
5
Change the time
Press [ENTER].
DATE TIME
2009/03/01 00:00:00
DATE TIME
2009/03/10 10:15:03
1
P r o j e c t S a v i n g . . .
G o o d b y e S e e y o u !
2
1
Z O O M R 1 6
V e r : 1 . 0 0
P R J 0 0 0 P R J 0 0 0
0 0 0 0 : 0 0 : 0 0 : 0 0 0
Rotate the DIAL
to change the
numbers.
TOOL>SYSTEM>DATE/TIME
Reset
DATE TIME
Move with
the cursor
keys
Turn [POWER] switch OFF: Shut-down
Use the
cursor keys
to move in
the Menu
Move with
the cursor
keys