Recording to the master track, Hint – Zoom R16 User Manual
Page 43
Recor
ding to the master trac
k
Play the master track
Disable master track playback.
Preparation: Adjust the signal levels.
42
Recording to the master track
Record a "final" stereo mix as a mix down on the [MASTER] track. Signals are recorded to the [MASTER]
track after passing through the [MASTER] fader.
HINT
• Each project can have one master track.
• The master track will have a file assigned.
• You can even mix down from the middle of a song,
overwriting the data of the recorded section.
• During recording you can confirm the playback
levels of each track and the recording levels of
the master track.
• The signals sent from the OUTPUT jacks are
the same signals that have passed through the
[MASTER] fader.
• You can use the [UNDO/REDO] key.
• You can use the metronome during playback.
Consecutive playback of
multiple master tracks.
No.65
Press [MASTER/MIX
DOWN/PLAY] 1-2
times until the light
turns off.
Light off: muted
4
Muting of the other tracks
is canceled and their status
lights become as they were
before enabling master track
playback.
1
Press [MASTER/MIX
DOWN/PLAY] 1-2 times
until the green light
turns on.
Green light on: playback enabled
Doing this mutes the other tracks and
disables all effects.
Mix down/Bounce
2
Press [REW] & [Stop] at
the same time to return
the counter to the head.
3
Press [STOP] to stop playback.
1
Press [REW] + [STOP]
at the same time and
then [PLAY] to start
playback from the top.
Play the tracks, and adjust the
mix balance of the tracks.
Recording to the master track
NOTE
The settings of the pan/balance, insert and send/
return effects of each track affect the signals sent to
the master track and are reflected in its sound.
Press [MASTER/MIX
DOWN/PLAY] 1-2
times until the red light
turns on.
Red light on: recording enabled
4
3
Press [STOP].
7
Press [STOP] to stop
recording.
Adjust the level of the signal that
passes through the master fader.
2
Red
Orange
Green
Green
Carefully control
the level so as
not to light the
red indicator
(clip=0dB).
6
Press [REC] and [PLAY]
in turn to start recording.
5
Press [REW] & [Stop] at
the same time to return
the counter to the head.
Recording to the [MASTER] track.
Press [PLAY] to start
playback.