TeeJet CenterLine User Guide v2.02 - Manual (Page 24)

20 Chapter 2 - Setup
Table 2-13: System Settings
Unit
System units allow the selection of either U.S. or Metric units of measurement. To change the sys-
tem units, navigate to and press the Enter button. Use the Arrow buttons to navigate to
and press the Enter button. Options are either US or Metric. Select the appropriate option
and press the Enter button to save the setting and progress to the menu.
Figure 2-29: Unit selection
Table 2-14: Unit Setting
Language
CenterLine is pre-loaded with several language options. To change the system language, navigate
to and press the Enter button. Use the Arrow buttons to navigate to and
press the Enter button. Toggle through the language options using the Arrow buttons and press the
Enter button to save the setting and return to the menu.
Setting Default Value Change Upon Startup
Unit US Optional
Language English Optional
Setting Description
US All units are entered and displayed in feet, miles, and acres. This is the default setting.
Metric All units are entered and displayed in meters, kilometers, and hectares.
US Unit
Metric
Arrow buttons
Enter button