Advanced configuration ~ macros – ClearOne comm PSR1212 User Manual

Page 68

Advanced Configuration

~ Macros

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

To create a macro using Macro Editor

1. Click

the

Macro Editor button in the G-Ware toolbar to open the Macro

Editor.

2. Select

the

Macro (from 1 to 255) you are creating from the Macro list.

Numbers that are already assigned to macros will be marked with an

asterisk.

Select the

Protected check box to lock your macro. Locked macros are

indicated by a padlock icon. Macros that are locked do not require the

password to be run. However, the password is required to make changes to

the macro. The macro password is the same as the preset password and is set

in the Unit Properties window; see page 26.

4. Click

Change Name to create a more descriptive name for the macro which

is displayed in addition to the macro number (limit 20 characters).

5. Type any notes pertaining to the macro in the Macro Description box.

Select the

Device Type and ID from their respective lists.

Select the

Command from the Command list. When you select a command,

a description of it appears in the Command Description box.

Select the command parameters from the argument lists. The parameters

that are available depend on the command selected. When you select an

argument, a description of it appears in the Argument Description box.

Figure 4.15. Macro Editor window

Figure 4.16 Macro Name window

Figure 4.14.

Macro Editor button