ClearOne comm PSR1212 - Manual (Page 106)

Appendices ~ Appendix E: Serial Commands 100
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
DECAY - Decay Adjust
This command selects/reports the setting of the decay rate for a specified input.
Command form: DEVICE DECAY [Value]
Argument details
Name Description
Device 0–7 or * to select all units
DECAY Command form
Channel Range 1–8 (selects mic input)
Value 1 = Slow, 2 = Medium, 3 = Fast, Null to return current state
Example: #43 DECAY 1 3 On PSR1212 unit 3 (#43), the decay rate (DECAY)
for mic channel 1 is set to fast (3).
DELAY - Delay Adjust
This command selects/reports the delay time of each assignable processing channel.
Command form: DEVICE DELAY [Value]
Argument details
Name Description Units
Device 0–7 or * to select all units
DELAY Command form
Channel A–H (select processing channel)
Value 0.00 to 500 (selects delay) ms
Null to return current state
Example: #46 DELAY A 200 On PSR1212 unit 6 (#46) the delay (DELAY) for
processing channel A is set to 200ms.
DELAYSEL - Delay Select
This command selects/reports the delay activation of an assignable processing
channel.
Command form: DEVICE DELAYSEL [Value]
Argument details
Name Description
Device 0–7 or * to select all units
DELAYSEL Command form
Channel A–H (select processing channel)
Value 0 = Off, 1 = On, 2 = Toggle, Null to return current state
Example: #44 DELAYSEL A 1 On PSR1212 unit 4 (#44) the delay
( DELAYSEL) within processing channel A is enabled (1).