Glossary – ClearOne comm PSR1212 User Manual
Page 140

134
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
S–Z buses These eight buses are defaulted as auxiliary mix buses. They are used to
route auxiliary audio to and from other units on the network. These buses are also
used as mic mix buses when NOM count is not required.
Serial Command A bit description designed to execute an instruction or command.
Serial mode The serial mode determines the format in which serial commands
return text or binary. The mode defaults to Binary when G-Ware is connected and
to Text when disconnected. Contact technical support for instructions on using
Binary mode.
Signal Delay Used for:
•
Compensating for physical placement of multiple drivers in a cluster—
to
align points of acoustic origin in the same plane.
•
Ensuring matching arrival times at listeners from multiple loudspeaker
drivers.
•
Using the Haas effect to maintain localization of the source, even with a
distributed system.
Signal Generator A device for generating a reference tone for sound system
calibration purposes.
Site file A site file is a file created by G-Ware which is saved on your computer.
The site file contains all information about a particular installation including all unit
settings and properties. It also provides G-Ware with the necessary information to
communicate with the site hardware using your PC.
Site properties The Site Properties window opens when you select New Site from
the File menu or click on the New Site button on the toolbar. It allows you to enter
information about the site as well as configure the communication and security
settings.
Table View Displays the numerical values of the filter parameters for all nodes of
the active filter display.
Threshold The upper or lower level at which a signal processing mechanism begins
or terminates operation.
Unit properties The Unit Properties window opens when you add a new unit to the
site. It allows you to enter information about the unit as well as configure the
communication and security settings.
Virtual reference Virtual references are echo cancellation reference points.
Multiple signals can be included in each of the four virtual references, thus allowing
Glossary