ClearOne comm PSR1212 - Manual (Page 116)

LVLREPORT - Level Report
This command selects level status reporting.
Command form: DEVICE LVLREPORT [Position] [Value]
Argument details
Name Description
Device 0–7 or * to select all units
LVLREPORT Command form
Channel See Groups and Channels, page 93
Group See Groups and Channels, page 93
Position See Meter Type Definitions, page 94
Value 0 = Off (Delete level from list of levels to be reported)
1 =On (Add specified level to list of levels to be reported)
2 = Toggle
Example: #42 LVLREPORT 8 L I 1 On PSR1212 unit 2 (#42), the level
( LVLREPORT) of line level (L) input 8 at the input stage (I) is to be added (1) to
the report.
LVLRRATE - Level Report Rate
Sets the level report rate for the unit and activates/deactivates level repeating.
Command form: DEVICE LVLRRATE [Value]
Argument details
Name Description Units
Device 0–7 or * to select all units
LVLRRATE Command form
Value 0 = Turn off reporting but leave current list
1 = Turn off reporting and clear the list
50 to 1000 = Set Rate (1 meter every x ms) ms
Null to return current value
Example: #43 LVLRRATE 100 On PSR1212 unit 3 (#43), the level report rate
( LVLRRATE) is set to 100ms.
110
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands