ClearOne comm PSR1212 - Manual (Page 109)

103
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
FILTSEL - Filter Select
This command turns on and off the filters on input and audio processing channels.
Command form: DEVICE FILTSEL [Value]
Argument details
Name Description
Device 0–7 or * to select all units
FILTSEL Command form
Channel See Groups and Channels, page 93
Group M = Mic Inputs, P = Processing Channels
Node 1-4, or * for all (selects mic input filter)
1-15, or * for all (selects processing channel filter)
Value 0 = Off, 1 = On, 2 = Toggle, Null to return current state
Example: #44 FILTSEL B P 2 1 On PSR1212 unit 4 (#44), the filter
( FILTSEL) on processing (P) channel B, node 2, is set to on (1).
FLOW - Flow Control
This command selects/reports the flow control of the serial port on the unit.
Hardware flow control is implemented using DTR and DSR.
Command form: DEVICE FLOW [Value]
Argument details
Name Description
Device 0–7 or * to select all units
FLOW Command form
Value 0 = Off, 1 = On, 2 = Toggle, Null to return current state
Example: #46 FLOW 1 On PSR1212 unit 6 (#46), the flow control (FLOW) to
the RS-232 port is set to on ( 1).
FMP - First Mic Priority Mode
This command selects/reports first Mic priority mode for a gating group.
Command form: DEVICE FMP [Value]
Argument details
Name Description
Device 0–7 or * to select all units
FMP Command form
Channel 1–4, A–D (selects gating group)
Value 0 = Off, 1 = On, 2 = Toggle, Null returns the current mode
Example: #45 FMP A 1 On PSR1212 unit 5 (#45), the first mic priority mode
( FMP) for gating group A is set to on (1).