ClearOne comm PSR1212 - Manual (Page 123)

117
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
PAA - PA Adaptive Mode
This command selects/reports PA adaptive mode for the specified mixer. There can
be only one selection per mixer.
Command form: DEVICE PAA [Value]
Argument details
Name Description
Device 0–7 or * to select all units
PAA Command
Channel 1–8 (select mic input)
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current mode
Example: #47 PAA 1 0 On PSR1212 unit 7 (#47), the PA adaptive mode
( PAA) on mic channel 1 is disabled (0).
PP - Phantom Power
This command selects/reports the setting of phantom power.
Command form: DEVICE PP [Value]
Argument details
Name Description
Device 0–7 or * to select all units
PP Command
Channel 1–8 (select mic input)
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current mode
Example: #41 PP 2 1 On PSR1212 unit 1 (#41), the phantom power supply
( PP) for mic channel 2 is enabled (1).
PRESET - Preset Execution/Reporting
This command selects/reports the state of a preset.
Command form: DEVICE PRESET [Value]
Argument details
Name Description
Device 0–7 or * to select all units
PRESET Command
Channel 1–32 (select preset)
Value 0 =Set the preset state to off
1 = Execute the preset and set the state to on
2 = Execute the preset and set the state to off
Null = Returns the current preset state
Example: #42 PRESET 5 1 On PSR1212 unit 2 (#42), preset (PRESET) 5
will execute and set the state to on ( 1).