ClearOne comm PSR1212 - Manual (Page 126)

120
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
REFSET - Reference channel setup
This command selects/reports the output the reference channel tracks.
Command form: DEVICE REFSET [Value]
Argument details
Name Description
Device 0–7 or * to select all units
REFSET Command
Channel 1–4 (select Virtual Reference number)
Group 1–9 (select output channel to track)
Value 0 = none
Example: #43 REFSET 2 4 On PSR1212 unit 3 (#43), virtual reference (2) will
track gain changes made on output channel 4.
SERECHO - Serial Echo
This command selects/reports the serial echo of the RS-232 port.
Command form: DEVICE SERECHO [Value]
Argument details
Name Description
Device 0–7 or * to select all units
SERECHO Command
Channel See Groups and Channels, page 93
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current state
Example: #44 SERECHO 1 On PSR1212 unit 4 (#44), the serial echo
( SERECHO) of the RS-232 port is set to on (1).
SERMODE - Serial Mode
This command selects/reports the serial mode of the RS-232 port.
Command form: DEVICE SERMODE [Value]
Argument details
Name Description
Device 0–7 or * to select all units
SERMODE Command
Value 1 = Text, 2 = Binary, Null = Current mode
Example: #45 SERMODE 1 On PSR1212 unit 5 (#45), the RS-232 port serial
mode ( SERMODE) is set to text (1).
Appendices ~ Appendix E: Serial Commands
If the serial mode is
changed, the terminal
will not see a response
from the unit, nor will the unit
respond to commands until the
new status is matched by the
terminal.
-