ClearOne comm PSR1212 - Manual (Page 127)

121
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
SFTYMUTE - Safety mute
Selects/reports the state of the safety mute. When on, the safety mute holds all
outputs on the selected unit in a muted state. It is used primarily for troubleshooting
G-Ware.
Command form: DEVICE SFTYMUTE [Value]
Argument details
Name Description
Device 0–7 or * to select all units
SFTYMUTE Command
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current state
Example: #42 SFTYMUTE 1 On PSR1212 unit 2 (#42), safety mute
( SFTYMUTE) is enabled (1).
SIGGEN - Signal Generator
This command selects/reports of the signal generator activation.
Command form: DEVICE SIGGEN [Type] [Amplitude]
[Frequency]
Argument details
Name Description
Device 0–7 or * to select all units
SIGGEN Command
Channel See Groups and Channels, page 93
Group I, M, L
Type 0 = Off, 1 = Pink, 2 = White, 3 = Tone, Null = Current state
Amplitude -60 to +20 amplitude in dB; NULL for type 0
Frequency 20 to 20,000 frequency in Hz (needed only when using tone
generation)
Example: #46 SIGGEN 1 M 2 0 On PSR1212 unit 6 (#46), the signal gen-
erator ( SIGGEN) is set to input at mic (M) channel 1 with white noise (2) at 0dB.
Appendices ~ Appendix E: Serial Commands