ClearOne comm PSR1212 - Manual (Page 107)

101
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
DFLTM - Default Meter
This command selects/reports the setting of the default meter.
Command form: DEVICE DFLTM [Channel] [Group] [Position]
Argument details
Name Description
Device 0–7 or * to select all units
DFLTM Command form
Channel 1–12
Group I = Inputs, O = Outputs, M = Mic Inputs, L= Line Inputs
Position I, A, N, G, as applicable for group
(see Meter Type definitions, page 94)
Example: #45 DFLTM 8 O A On PSR1212 unit 5 (#45), the default meter
( DFLTM) is set to output (O) 8 after the gain adjustment (A).
DID - Device ID
This command selects/reports the device ID.
Command form: DEVICE DID [Value]
Argument details
Name Description
Device 0–7 or * to select all units
DID Command form
Value 0–7 (select device ID)
Example: #47 DID 0 On PSR1212 unit 7 (#47), the device ID (DID) is set to 0.
Appendices ~ Appendix E: Serial Commands