Capturing text insertions, Setting the hdd to read-only – Interlogix DVR 11 User Manual User Manual

Page 29

3BChapter 4: Recording

TruVision DVR 11 User Manual

4. Select the file you want to lock/unlock.

The Locked column indicates whether a file is locked or not.

5. Click

to lock a file. Click again to unlock.

6. Click

Cancel

to return to live view.

Setting the HDD to read-only

When you set an HDD to read-only, recorded video files cannot be written to the
HDD. If multiple HDDs are used, the DVR automatically records to the next HDD
not set to read-only.

To set a HDD to read-only:

1. Click the

System Setting

icon in the menu toolbar.

2. Click

Hard Disk

to set up the HDD parameters.

3. Select the HDD you want to set to read-only.

4. Check

Read only

5. Click

Apply

to save the settings. The HDD is now read-only.

Note:

In order to enable recordings on that particular HDD again, you must

set the HDD status back to R/W (Read/ Write).

Capturing text insertions

The DVR supports Point-of-Sale (POS) and ATM text insertion via the UTC
ProBridge accessory connected to the RS-232 port on the DVR.

The feature is currently only available via the browser (see “Capturing text
insertions” on page 118).