Interlogix DVR 11 User Manual - Manual (Page 115)

14BChapter 15: User management
TruVision DVR 11 User Manual 109
Remote configuration settings
• Remote Log Search: Remotely view logs that are saved on the DVR.
• Remote Parameter Settings: Remotely configure parameters and
import/export configuration.
• Remote Camera Management: Remotely enable and disable channels.
• Remote Serial Port Control: For future use.
• Remote Video Output Control: For future use.
• Two-Way Audio: Use two-way audio between the remote client and the
DVR.
• Remote Alarm Control: Remotely alert or control the relay output of the
DVR. Alarm and notification settings must be configured properly to upload to
host.
• Remote Advanced Operation: Remotely manage HDDs (initializing and
setting properties for HDDs) as well as remotely update system firmware and
clear the I/O alarm output.
• Remote Shutdown/Reboot: Remotely shutdown or reboot the DVR.
Camera configuration settings
By default, all analog cameras are enabled for operators for each of these
settings and none for guests.
• Remote Live View: Select and view live video over the network.
• Local Manual Operation: Locally start/stop manual recording on any of the
channels, snapshots and video clips.
• Local Playback: Locally play recorded files that are on the DVR.
• Remote Playback: Remotely play and download recorded files that are on
the DVR.
• Remote PTZ Control: Remotely control PTZ dome cameras.
• Local Backup: Locally back up recorded files from any of the channels.
To customize a user’s access privileges:
1. Click the User Management icon in the menu toolbar to display its window.
2. Click the Permission button for the user whose access privileges need to
be changed. The Permissions pop-up window appears.
3. Click Apply to save the settings .
4. Click the OK button to return to the previous window.
8. Click Back to return to live view.