Restoring default settings, Viewing system information – Interlogix DVR 11 User Manual User Manual
Page 105
12BChapter 13: DVR management
TruVision DVR 11 User Manual
99
Restoring default settings
To restore the default factory settings of the DVR:
1. Click the
System Settings
icon in the menu toolbar and select
Configuration
.
2. Click the
Default
tab. Click
OK
to confirm you want to restore default settings.
Note: Network information such as IP address, subnet mask, gateway, MTU,
NIC working mode, server port, and default route are not restored to factory
default settings.
Viewing system information
To view system information:
1. Click the
System Settings
icon in the menu toolbar and select
System
Information
.
2. To view device information, click the
Device Info
tab.
3. To view camera information, click the
camera
tab.
4. To view record information, click the
Record
tab.