Chapter 13 dvr management, Configuring the rs-232 port – Interlogix DVR 11 User Manual User Manual
Page 103
TruVision DVR 11 User Manual
97
Chapter 13
DVR management
This chapter describes:
Configuring the RS-232 port
Updating system firmware
Restoring default settings
Viewing system information
Viewing system logs
Configuring the RS-232 port
Use the System Settings menu to configure the RS-232 parameters such as
baud rate, data bit, stop bit, parity, flow control, and usage.
Figure 29: RS-232 setup window
There are three ways the RS-232 port can be used:
ProBridge: POS and ATM text insertion supported via the ProBridge
accessory connected to the RS-232 port. See “Capturing text insertions” on
page 118 for more information.
ATS/Challenger: NTP time sync supported to foreign device over the RS-232
port.
Technical support: Console mode.