Brother WP-700D - Manual (Page 94)

Automatic Return
^ (SPACEBAR)
^
fr
Pressing ICODEI + [OPERATE] (©) sets the typewriter in the auto mode. The carrier
is automatically returned to the left margin if you type a space or a hyphen within
the hot zone.
NOTES:
• If you do not want the carrier to return when you type a space (the next word
can still fit in the hot zone), press iOHMEl + KSPAiCEBAR)] instead of
If you don’t want the carrier to return when you type a hyphen (the hyphen is
part of the word and the characters following this hyphen can still fit in the hot
zone-example: '‘built-in”), press +
0 instead of 0.
If you reach the right margin, the typewriter stops. Press [RETURN! to return
the carrier, or [CODE] + [MREll to continue typing beyond the margin.
Line-by-Line Mode
^ CODE ^
+
i
----------------
i ^ operate )
RMF
t
CTR CAPS WRD AUT
t L-
REMAIN-.XXX ?im DTA8 PITCHiXX L.SPiX.X KH:XX SHIFT IH$ EXP BID CNT JST $■
<< L/L MODE >> * •
You can enter the line-by-line mode and switch between the other sub-modes
with S) + iOPrtifel (i)).
1. Press ICODEI + lOPERATEl (® ) while in the auto mode of the type mode to dis­
play the l_/L mode screen. A text area limited to a single line appears in the
middle of the screen.
NOTES:
• In UL mode, automatic return is always activated. (See “Automatic Return”
on page 86.)
• If you need to justify your text, press 10^1 + lOPEffiffEI ('(o)) again to activate
the justify function and display the JSJ indicator.
86