Brother WP-700D - Manual (Page 150)

Error Messages
Please consult the following table when an error message appears.
Message Cause Remedy
Memory ful1.
You attempted an opera­
tion that would require
more memory than the
total limit of 32 kilobytes.
The merge file length
may have exceeded the
maximum length of 7
kilobytes.
Delete some parts of
the text using
■ m, '
iLINECMil, or the block
delete function. You may
also try to copy a smaller
block.
Unidentified disk error.
Insert another and press
RETURN.
Defective diskette. Consult your dealer.
Initialize? Press Y (yes)
or N (no).
You attempted to copy
an uninitialized source
diskette.
Initialize the diskette.
(This will erase any files
previously stored on the
diskette.)
Insert disk and press
RETURN.
The diskette is not
inserted when you start
a read operation, or the
diskette is removed dur­
ing read or write opera­
tion (a message was
telling you to wait).
Insert the diskette and
press MMIMH. In future,
please avoid removing or
inserting a diskette
while prompted to wait.
Incorrect disk. Insert
another and press RETURN.
The selected file cannot
be found on the inserted
diskette (you changed
the diskette so that the
WP INDEX screen and
the inserted diskette do
not match).
Press tftMWMJ or rein-
sert the correct diskette
Disk is write protected.
Press CODE + SPACE to
release and press RETURN
to retry.
You are using a soft
write-protected diskette. Use another diskette or
disengage the' soft pro­
tection.
Check printer.
Malfunction of the printer
mechanism. Consult your dealer.
Check disk.
Malfunction of the disk
drive.
Consult your dealer.
142