Brother WP-700D - Manual (Page 130)

Copying Data
fr
CODE
------- ¿1
r
1—
RECORD LABEL DATA COPY: PRINT
1. To copy the data of a label (or a part of it), position the cursor on the first
character to be copied.
2. Press iMENUl to display the function menu.
3. Use (3
3
nd O to select DATA COPY and press IBEOWHI. This message will
appear:
Move cursor to end of block to copy and press RETURN.
• Accelerator: Instead of (3), type “C”.
• Short cut: Instead of (2) and (3), press + ©.
4. Use (3 or (3 to mark the text (within the label) that you want to copy and
press WFUMW. This message will appear:
Move cursor to destination for blocked text and press RETURN.
5. Move the cursor to the destination position and press IRETURNI . The marked
text is inserted at the destination position.
NOTE:
You can press [CANCELI at any time to cancel the operation.
Inserting a Blank Record
If
CODE T e
1 —
RECORD insert DATA COPY PRINT
DELETE '■
1. Position the cursor on the record where you want to insert a blank record.
2. Press [MENUi to display the function menu.
3. Use s and (3 fo select RECORD and press tRETURWI or QQ to display the
sub-menu.
• Accelerator: Instead of (3), type “R”.
4. Use
CD
and Q3 to select INSERT and press [RETURNl. The insertion takes
place immediately.
• Accelerator: Instead of (4), type T.
• Short cut: Instead of (2), (3), and (4), press fCODEl + d].
When you insert a blank record, the record which was initially selected and all
records below are pushed down. The cursor rests on the blank record so that you
can enter new data.
122