Brother WP-700D - Manual (Page 74)

The definiiion of each setting is explained in the next table.
Option Definition
STARTING PAGE The page number of the file on which printing is to
start. The setting must be greater than zero and less
than 1000. The default is 1 (starting from the first
page).
ENDING PAGE The page number of the file on which printing is to
end. Must not be lower than the
STARTING PAGE num­
ber. If the number is higher than the total number of
pages, printing stops after the last page. The default is
999.
NUMBER OF COPIES The number of copies you want to print. Must be
greater than zero and less than 100. The default is 1
(the pages are printed once).
HEADER PRINT Use KSMCEBAR)! to toggle between YES and N0. If YES,
any existing header will be printed on each page. If N0,
no header will be printed, even if you have entered
one.
FOOTER PRINT Use tfmdntail to toggle between yes and N0. If YES.
any existing footer will be printed on each page. If N0,
no footer will be printed, even if you have entered one.
PAUSE FOR KB CHANGE Use to toggle between YES and N0. If YES,
pauses will be made for changing the daisy wheel
when necessary. If N0, all pages will be printed out
using the same keyboard that is used for the first char­
acter to be printed. However, if the character pitch had
been changed during the WRITE/EDIT mode, pauses
will be made for changing the daisy wheel even if N0 is
selected.
MERGE PRINT This should be left as N0 when printing ordinary docu­
ment files. (See “Merge Printing” on page 78.)
DOUBLE COLUMNS This should be left as N0 when printing ordinary docu­
ment files. (See “Double Column Printing” on
page 75.)
SPACE BET. COLUMNS This is used together with the above double columns
printing and should be ignored when printing ordinary
document files. (See “Double Column Printing” on
page 75.)
NOTE:
The default values for
S T A R T
IHG PAGE, ENDING PAGE, and NUMBER OF
IES are displayed each time the print menu screen is called up.
COP-
66