Corrections, Automatic correction, Correcting one character – Brother WP-700D User Manual
Page 102: Erasing one word
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Corrections
This typewriter has a one line correction memory that makes it possible to erase
any character or word automatically. This function, however, works only with the
current line.
Automatic Correction
Correcting One Character
To correct a character on the current line, use iBACKSWtCEl to move the carrier to
the mistyped character, press ICORRECTI to erase, then retype the correct charac
ter.
NOTES:
________
• Pressing ICORRECTI on a space moves the carrier back.
• Pressing
ICCWRECTI deietes the character positioned ieft of the cursor white in
centering, right margin fiush, decimai tab, and UL modes.
Erasing One Word
LiNEOUT
To erase an entire word, position the carrier next to the last character of the word
and press
. The entire word is erased and you can retype.
NOTES:
_______
• Automatic erasing in progress can be stopped by pressing ICORRECTI.
• Position the cursor to the space immediately to the right of the word to be
deleted while in centering, right margin flush, decimal tab, and UL modes.
Congratulations on your purchase
of
this new word
A
Congratulations
on your purchase
of
this new /
A /
Carrier
94