Note, Changing correction tapes – Brother WP-700D User Manual
Page 155
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Grasp the cassette with both hands, raise the
front end and lift out.
NOTE:
The amount of ribbon remaining can be
checked through the viewing hole on the right
side of the cassette.
Turn the feed knob on the left side of the new cas
sette counterclockwise to take up any slack.
Align the arrow on the cassette with the center of
the cassette holder, slide the ribbon between the
guides, and use both hands to ease the cassette
into the holder.
Gently press down on the front of the cassette
until it clicks into place. Once again turn the feed
knob counterclockwise to take up any slack.
Close the acoustic cover.
Changing Correction Tapes
This word processor uses correction tape to correct typewriter errors. Two types
of correction tapes are available, Brother Lift off tape model #3010 (for use with
the correctable film ribbon) and Brother Cover up tapes model #4010 (for use with
the nylon ribbon). (See “Compatible Accessories” on page 150.)
Turn the power on and use
to switch the
word processor to the Typewriter application.
II
TW/WP
------- V
147