J setting up, Removing the packing pieces, Notes – Brother WP-700D User Manual

Page 12: Note, Setting up

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting Up

Removing the Packing Pieces

Before you plug in the word processor, open the acoustic cover and remove the

yellow plastic pieces shown in the illustrations below.

NOTES:

• If the plastic pieces are not removed, damage to the word processor may

occur when the power is turned on.

• The yellow plastic pieces do not need to be re-installed unless you are re

packing the word processor for shipping.

Remove the protective cover.

NOTE:

Replace the protective cover when the word

processor is not in use.

Lift the acoustic cover.

Remove the yellow plastic pieces.

NOTE:

Be sure to reinstall the display and cover.

The acoustic cover is equipped with a safety

switch. Your word processor will not operate

unless the acoustic cover is securely closed.