Brother WP-700D - Manual (Page 104)

Manual Corrections
^CODE ^ ’^CORRECT
—
a
i-------------------=
When a correction is required above the current line, or if you have to reinsert the
paper, the memory correction does not work because the line memory is cleared
each time the paper is fed more than 1/12 inch.
NOTE:
This function cannot be executed while in the centering, right margin flush,
decimal tab or UL mode.
1. Use ICODEI + [PDOWNl (or the platen knob) to position the carrier where a cor­
rection is required. Move the carrier to the character to be corrected with
liACKSPACE] or I (SPACE BAR)I . If necessary, use ICODEI + ( b $ i I to accurately
position the carrier.
Congrstulations on your purchase of this new word
A
2. Press fcODEl + [COTnECTl. The M. C indicator appears.
3. Retype the same character again. The character is erased and the M.C indi­
cator disappears.
Congr tuiations on your purchase of this new word
A
4. Type the desired character.
Congratuiations on your purchase of this new word
A
96