Note, Inserting and removing a diskette, Caring for your diskettes – Brother WP-700D User Manual

Page 20: I_j diskettes

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

i_J Diskettes

This word processor accepts only the following type of 3.5-inch diskettes:

MF-2DD (Double Sided/Double Density/Double Track)

MF-1DD (Single Sided/Double Density/Double Track)

NOTE:

Your word processor cannot use high density (“HD”) diskettes, so be sure to

purchase only double density double track (“DD”) diskettes. It is recom

mended that you use Brother brand diskettes.

Inserting and Removing a Diskette

Insert the diskette as shown in the illustration.

To remove the diskette, press the eject button.

CAUTION

- The diskette may be inserted and

removed when the power is either on or off. It may
also be left in the drive while transporting the

word processor.

However, you should never

insert or remove it while a message indicates

that a diskette operation is in progress.

Caring for Your Diskettes

The slightest damage, such as a scratch, or a small amount of dust on a diskette

can spoil an entire file and make it unusable. The protective case of the 3.5-inch
diskette protects the sensitive disk surface. (The metallic shutter automatically
opens and exposes this sensitive surface only when the diskette is inserted into

the drive.) Additional precautions must be taken in order to ensure reliable main
tenance of your files.