Safety instructions 1 – ALTANA Wave-Scan II User Manual
Page 6

5
English
• Avoid exposure to continuous humidity and condensation (see
Technical Data). Avoid splashing with water, chemicals or other liquids.
• Never attempt to make any repairs to the instrument, neither
mechanical nor electrical. Please consult our Technical Customer
Service.
• Only devices that meet the requirements for low-voltage safety
may be connected to the USB interface.
• For operation with the external power supply, care should be
taken to ensure the nominal voltage of the power supply unit (see
the manufacturer’s plate on the power supply unit) matches the
voltage supplied by the power outlet.
• The measurement device and accessories may be disconnected
from the power supply as follows:
Instrument:
a) by removing the battery compartment or
b) by removing the rechargeable battery pack or
c) by removing the measurement unit from the docking station
Docking station:
a) by disconnecting the plug from the power supply unit on the
docking station
b) by disconnecting the power supply unit plug from the socket
The power supply unit can be disconnect from the power supply by
disconnecting the power connection line plug from the socket.
Make certain that the power supply unit plug is easily accessible.
Use only the power supply connection line included with delivery.
• When working with the batteries and the rechargeable battery
pack, make certain there is no short circuit on the contacts. Metallic
objects must not come in contact with the bare contacts.
Safety instructions
1