ALTANA Wave-Scan II - Manual (Page 16)

15
English
Control elements 5
The basic system consists of the
measurement device and the docking
station.
The docking station is used to
exchange data and to charge the
rechargeable battery pack.
When the unit is not in use, place it in
the docking station. In this way the
rechargeable battery pack will be
charged and the instrument will always
be ready for measurements.
The operate button and scroll wheel are
used to control the system. Pressing
“operate“ turns the unit on and causes
a menu to be displayed. All settings
within the menus are made by turning
the wheel and pressing “operate”.
Pressing the operate button performs
measurements or runs selected
functions. System operation is
supported by an autodiagnosis test,
comments and error messages.
Measurement values and comments
appear in the display.