ALTANA Wave-Scan II - Manual (Page 10)

9
English
Note:To ensure uniform utilization, the
rechargeble battery packs should be
exchanged regularly between
instrument and docking station
(weekly recommended). compartment and spare batteries
handy, especially when performing
measurements in the field.
Rechargeable battery pack:
To place the instrument in service, the
rechargeable battery pack must be
inserted until it locks in place.
The rechargeable battery pack can
only be attached when it is in the
correct position.
When inserting the rechargeable
battery pack, ensure that its contacts
are aligned with those of the
instrument. See adjacent figure.
The capacity of the rechargeable
battery pack included with delivery is
sufficient for about 1000
measurements. When the voltage of
the rechargeable battery pack falls
below the required operating voltage
in the course of operation, the
following message appears on the
display: “Low Battery!”
Docking station power supply:
Power is supplied to the docking station
through the external power supply unit.
Connect the external power supply unit
to the docking station. Connect the
appropriate end of the power
connection line to the power supply
unit and the plug end of the power
connection line to the power outlet
after verifying that the specifications of
the power supply unit match the po-
wer source in terms of current and
voltage.
Commissioning and power supply 3