ALTANA Wave-Scan II - Manual (Page 25)

24
English
9 Measure
Interrupt Checkzone
This function allows you to exit a
checkzone/sample before reaching the
preset number of measurements or to
skip a checkzone. Then you can
continue the measurement series with
the next checkzone.
If Interrupt is not activated in the
Configuration menu (Chapt. 11) or the
Configuration of the selected
Organizer, a message will be
displayed.
Parameter Info
Gives you an information about the
selected parameters of the sample.
End Test Series
Ends the entire measurement series. A
confirmation display appears. The
instrument returns to the Measure
menu.
If Interrupt is not activated in the
Configuration, a message will be
displayed in the case that the test
series is not finished yet.
Note:
Only complete series can be saved,
i.e. you can exit series only by
deletion.