9measure – ALTANA Wave-Scan II User Manual
Page 23

22
English
9
Measure
For beginning a new test series, select
Measure from the Main Menu. The
Measure menu offers a list of names to
identify the new test series (Parame-
ter1). Individual entries can be added
to the list.
Two types of test procedures can be
differenciated by a symbol in front of
the names:
Memories:
generated in the instrument, allow to
input identification parameters during
measurement procedure.
Organizer:
downloaded from the auto-chart
software, offer a predefined test
procedure for user guidance and
identification.
A virgin instrument contains only two
entries in the menu, which can not be
deleted:
MEMORY - for simple measurement of
samples.
Standard - for checking the instrument
on the test tile (see chapter 14)
Select a desired item from the list to
start the test series and perform the
measurements according to section 6.
Differences between the measurement
procedures will be explained in
chapter 9.1 to 9.3.