ALTANA Wave-Scan II - Manual (Page 13)

12
English
4 System description
The saved results are transferred to the
PC and displayed as a QC report.
The data is saved in a database for
further analysis over time. Pre-
prepared test reports in the auto-chart
software assist in analyzing the data.
Storage structure
Each measurement series contains a
header and the individual
measurements with name (test zone)
and measured values.
In the header, up to 5 parameters can
be defined for object identification.
Parameters 1 to 3 are defined in the
Organizer file, parameters 4 and 5 can
be entered before storage in the data
base. Additionally, date and time of
the measurement are stored.
This structure determines the data
organization in the instrument and in
the data base. In addition to using
Organizers, i. e. definition of
parameters before the measurements,
parameters and test zones can also be
entered during the measurements. See
chapter “Memory”.