ALTANA Byko-Spectra Effect Short Instructions - Manual

269 020 584 E 0806
Additives & Instruments
A member of
Measure what you see.
BYK-Gardner GmbH · Lausitzer Strasse 8 · 82538 Geretsried · Germany · Tel. +49-8171-3493-0 · Fax +49-8171-3493-140 · www.byk.com/instruments
ENGLISH
byko-spectra effect
1
Main switch and fuse compartment
2
Switch board operating controls
3
Lever to position sample tilting table
Instrument Setup
• Select the appropriate fuses for 115 V
(T1.6 AH 250V) and 230 V (T0.8 AH 250V)
• Insert one fuse into the black
compartment ( B ) and one into the grey
fuse housing ( A )
• Insert the grey fuse housing ( A ) into
the black compartment ( B )
• Make sure that the correct voltage
number is readable in window ( C )
Switch Board Operating Controls
1
Timer to track daylight lamp usage
2
Dimmer for sparkle illumination (15°/45°/75°) adjusting for
sample lightness
3
Turn-switch to select color or sparkle illumination
1
3
2
1 2 3
A
B
C