ALTANA Wave-Scan II - Manual (Page 14)

13
English
System description 4
Application hints:
Measurement task
1. Single measurements, e.g.
occasional sample-measurements
2. Objects with several test zones.
Test sequence / identifikation can be
standardized, e.g. automobile or add-
on parts
3. Regular test series. Test sequence /
identifikation can be standardized, e.g.
batch control
4. Occasional test series. Test
sequence / identifikation can not be
standardized, e.g. projects
Recommendation
- Menu “Measure“ > “MEMORY“.
- Transfer results directly to Excel file
“wscLink_4“ (auto-chart main
directory).
- Generate Organizer in auto-chart
and transfer it to the instrument.
- Take readings, see chapter 9.2.
- Transfer results to auto-chart and
store in data base.
- Data analysis with “QC reports” in
auto-chart.
see 2.
- Generate new Memory (chapter
Memory, Config. New).
- Take readings, see chapter 9.1.
- Transfer results directly to Excel
file “wscLink_4“ (auto-chart main
directory).