ALTANA Wave-Scan II User Manual
Page 41

40
English
12
Memory
Configuration Change
This function allows to modify the
configuration of an existing memory.
A menu appears with a list of the
existing memories and organizers.
Select the desired memory.
A menu then appears listing the
configuration of the selected memory.
To change the settings, refer to
chapter 10 and 11.
To exit the menu, activate the arrow at
the top of the menu.
Note:
Changes to the settings of Organizer
files are not permitted. If an Organizer
is selected, a warning message will
appear.
Changes in the configuration are only
possible if no measurement data are
saved in the selected memory. Before
you change the configuration, first
backup the stored data and then
delete them.
This manual is related to the following products: