ALTANA Wave-Scan II - Manual (Page 19)

18
English
6 Getting started
Display of measurement results
The measurement results displayed
will vary depending on the options
selected in the Configuration (see
chapter 10, 11). Displayed results may
be broken down into the following
elements:
A: Name of the measured sample or
checkzone.
B: The number of performed and
predefined measurements (e.g. 2 of 3).
The statistic function is activate if the
predefined number of measurements
is greater than 1.
C: If the statistic function is activated,
the selected statistical values appear
here.
The measurement values appear in the
lower part of the display area.
Pressing the operate button now, the
values will disappear and the number
of readings is increased by one. Or, if
a sample is finished, the name of the
next checkzone/sample will be
displayed.
To exit the measurements, press the scroll
wheel. A menu for deleting, interrupt or
ending the series appears. Use the scroll
wheel to move the cursor to “End Test
Series” and press operate. The display
switches to the Measure menu after a
request for confirmation.