ALTANA Wave-Scan II - Manual (Page 59)

58
English
19 Info - and Error Messages
When attempting to measure an
Organizer near the end of memory
capacity, the instrument can detect,
based on the Organizer structure, that
memory will be exhausted before the
end of the measurement series. It then
generates this error before the
measurement begins.
Information
The measurement was performed on a
surface with low image forming
qualities or steep structure sloops.
Attention: Samples with different
image forming quality are not
comparable!
The measurement was performed on a
surface with too low image forming
qualities or too steep structure sloops.
Only „dullness“ can be measured and
displayed.
The measurement was performed on a
too matt surface, no measurement
values can be displayed.
The setting option “Interrupt” for the
selected memory is not activated or
not allowed (Organizer).
Warning message indicating that
measurement values are present in
the memory selected for deletion.
Out of linear range
Not measurable
Not measurable
Dull Surface