6getting started – ALTANA Wave-Scan II User Manual
Page 17
16
English
Turning the unit on and measuring
Turn the instrument on by pressing
the operate button.
If the operate button is depressed
while switching the unit on, a reference
to the firmware appears along with the
date of the last certification.
The unit then switches to the last
measurement mode to be selected.
If no measurement mode has been
previously selected, the main menu
appears. For the first steps, select ME-
MORY under the “Measure” menu.
To perform a measurement, press and
hold the operate button.
Move the instrument evenly and slowly
over the sample surface.
During the measurement, the following
information appears in the display:
The upper bar shows the progress of
the measurement. The two lower bars
provide information about the status of
the memory and battery capacity.
6
Getting started