ALTANA Wave-Scan II - Manual (Page 29)

28
English
9 Measure
9.3 Memory with Parameter Input
By using the internal memory function
of the instrument, measurement series
and samples/checkzones can be
identified by individual names during
the test procedure.
Therefore, input options of the menu
item Advanced Configuration need to
be activated for the desired memory.
You can use the existing MEMORY in
the instrument or create another
memory name (Parameter 1). For
more information about change of
configuration please refer to section
Configuration.
Select a memory for which Input Para-
meter 2, 3, Input Comment or Input ID
are activated. A menu appears to
assign a name.
If there are preexisting names for this
memory, they are shown in a list for
selection. The >>NEW<< option
opens another menu with a list of all
names available in the instrument.
Here, the menu item >>NEW<<
opens an input mask which allows you
to create a new designation.
Enter the name by using the scroll
wheel. When finished, press the
operate button.