ALTANA Wave-Scan II - Manual (Page 5)

4
English
(EN 60825)
Caution:
Since the laser beam used for sampling can penetrate your eye and
cause injuries, never dismantle the instrument and never look directly
into the measurement aperture when the device is turned on.
• If you use the unit and accessories properly, there are no hazards
to fear – none of a mechanical nature and none caused by electrical
shock.
The following paragraphs contain information about the safe use of
the device.
• Please use only original accessories provided by the
manufacturer. Only the included external power supply may be used
to power the docking station. See “Delivery Notes” and the
“Technical Data” for further information.
No claims of product liability or warranty can be honored if the
device is not operated in accordance with the operating instructions
and the instructions on the instrument.
The measurement unit is a class II laser product.
The labels shown below are on the housing and base of the
measurement unit.
1 Safety instructions
Great Britain
USA
Laser Light
Do not stare into beam
Class 2 Laser Product
max < 1 mW 630 – 690 nm
According to IEC 825